Pneumatic thread end ball valve catalogue

 DOWNLOAD

In this catalogue, you will find all datasheet for Pneumatic thread end ball valve, including material, dimension, assembly drawing, working temperature, nominal size, pressure rating.

Overview:

Pneumatic threaded ball valve is composed of internal thread ball valve and pneumatic actuator. According to different structural forms, it can be divided into integral type (one-piece type), two-piece type and three-piece type. Because the valve itself is small in size and compact in structure, it is especially suitable for The installation size is limited and the occasion space is relatively narrow.

The pneumatic threaded ball valve uses compressed air as a power source to operate the opening and closing of the ball valve. Double-acting or single-acting actuators can be selected according to work needs. , automatically return to the on or off state.

Advantage:

1. A manual operating mechanism can be installed on the top or bottom of the actuator to manually open and close the valve.
2. The internal thread pneumatic ball valve has the advantages of small size, good sealing performance, reliable operation, easy maintenance, convenient installation and strong adaptability.
3. The sealing structure is divided into metal seal and elastic soft seal, which can be used in different working conditions respectively.

4. The pneumatic threaded ball valve adopts a bottom-mounted structure with an inverted seal. When the valve cavity is abnormally boosted, the valve stem will not be impacted. A 90° switch positioning mechanism can be set, which can be locked as required to prevent misoperation.